Compressor and pumping equipment Mouvex Blackmer
Mouvex Blackmer is a French producer of pumping equipment for stationary and mobile use. For more than 100 years of its activity, the company achieved a global presence (US, Europe, Asia) in the supply of compressors and pumps of the highest quality and reliability, together with an extensive service network.
The Blackmer Company has been cooperating closely with ALFIMEX in business and service activities since 2005 but its products have been known by customers in the Czech Republic for many years.
To select the appropriate type of compressor or pump and specification of your requirements, please send us a complete questionnaire, which you can download in the annex of this party.
Screw compressors B600, Mistral and Typhon
The Screw compressors are characterized by high reliability without the need for special maintenance while maintaining high technical parameters. This is the highest generation of oil free screw compressors with very low noise levels. Compressors B600 and Mistral are suitable for off-loading loose materials from the tank trailers. These include materials like cement, lime, industrial ashes, chalk, PVC, sugar and the like. Typhon, given its higher performance, is also suitable for unloading the coarse-grained materials such as granules or compound.
All BLACKMER compressors can be driven by the following ways:
- Direct cardan shaft drive, for vane compressors is not required safety clutch of cardan shaft,
- drive by belt transmission powered by PTO via cardan shaft,
- hydraulic power system drive,
- diesel engine drive,
- electric motor drive.
Rotary vane compressors E140 a E170
These are oil-free compressors for off-loading liquids from tanks. Compressors Mouvex has a unique and patented aperture for measuring the wear rate of the compressor vanes without having it removed and disassembled.
All BLACKMER compressors can be driven the following ways:
- Direct cardan shaft drive, for vane compressors is not required safety clutch of cardan shaft,
- drive by belt transmission powered by PTO via cardan shaft,
- hydraulic power system drive,
- diesel engine drive,
- electric motor drive.
Oil coolers Hydrive 2010, Hydrive 2020
The BLACKMER Hydrive is a fully integrated hydraulic cooling system with ventilator driven by a hydraulic pump and a hydraulic engine, which was designed to drive the compressors and other equipment. This technology and the most modern components have been designed to achieve the maximum cooling effect at the minimum maintenance with minimum amount of oil, the least proportions and so minimum weight in comparison with 10 to 20-liter oil tank with a ventilator.
Pumps STX-3, CCL 50i
STX-3 is rotary vane pump designed for unloading of tank trailers. It can deliver as many as 946 LPM at differential pressures up to 8.6 bars and maximum speed of 800 RPM. For example, this means that a 22,700 litre tanker can be off-loaded as quick as 24 minutes. The pumps STX 3 have got two shafts, which allow rotation or counter clockwise. The pump STX 3 is suitable for a wide range of corrosive fluids or not, for example, solvents, various chemical substances, acids, or vegetable oils.
CCL 50i is a newly designed propeller pump of the highest quality for the foodstuffs, but also for cosmetics, chemical products and other materials with maximum flow rate up to 65 m3/h.
